Vehicle-Specific Installation Notes

Rain Tracker Model: RT-40A
Vehicle-Specific Installation Instructions
The instructions included with the product tell you how to install a Rain Tracker. This page gives special vehicle-specific information. Print this page using your browser's print function.

Application Vehicles
These instructions apply to these vehicles, which all have similar wiper systems:

HONDA ACCORD 82 - 02
HONDA CIVIC 82 - 05
HONDA CRX 84 - 91
HONDA DEL SOL 93 - 97
HONDA INSIGHT 00 - 06
HONDA FIT 07
HONDA PRELUDE 82 - 01
HONDA S2000 00 - 07
HONDA-TRUCK CR-V 97 - 06
HONDA-TRUCK ELEMENT 03 - 08
HONDA-TRUCK ODYSSEY 95 - 04
HONDA-TRUCK PILOT 03 - 07

Wiring Diagrams and Drawings:

1991 Honda Accord- Drawing applies to all application vehicles listed above. Print this.
RT-40A - GSS (Ground Side Switching)- Included with product, so print only if needed.
Troubleshooting procedure- Print out if needed.

Wire colors used in this vehicle:

+12V - GRN/BLK
GROUND - BLK
FAST - BLU/YEL
SLOW - BLU

Special Rain Tracker Installation Notes for this vehicle:

Write the wire colors of the vehicle on the GSS drawing, and follow that
when you wire up the Rain Tracker. Use the factory drawing as a reference
to help you find the wires. Some models and years may vary slightly in wire colors.
Factory drawings can be wrong, so, confirm wire colors with a multimeter.

All wiper system wires are available at the wiper switch. They can usually be accessed
by removing one or two access panels (Kick Panels) and, possibly, the shrouds surrounding the
steering column.

WIRE CONNECTIONS
+12V - YEL/GRN on some
1995-1998 Odyssey, FAST - YEL/RED and SLOW - GRN/RED

The RT-40A does not utilize the FAST windings of the wiper motor. Please disregard any references
to FAST that appear in these instructions.

The Rain Tracker wiper control system is compatible a wide range of windshield transmittances and thicknesses This page generated by vehicle data file name: honda_accord_84-02.veh