Vehicle-Specific Installation Notes

Rain Tracker Model: RT-50A
Vehicle-Specific Installation Instructions
The instructions included with the product tell you how to install a Rain Tracker. This page gives special vehicle-specific information. Print this page using your browser's print function.

Application Vehicles
These instructions apply to these vehicles, which all have similar wiper systems:

TOYOTA-TRUCK 4RUNNER 03 - 07
TOYOTA-TRUCK FJ CRUISER 07
TOYOTA-TRUCK LANDCRUISER 82 - 90
TOYOTA-TRUCK LANDCRUISER 97 - 07
TOYOTA-TRUCK SEQUOIA 01 - 07
TOYOTA-TRUCK TACOMA 05 - 07
TOYOTA-TRUCK TUNDRA 00 - 04

Wiring Diagrams and Drawings:

2005 Toyota Tacoma- Drawing applies to all application vehicles listed above. Print this.
RT-50A - HSS (Hot Side Switching)- Included with product, so print only if needed.
Troubleshooting procedure- Print out if needed.

Wire colors used in this vehicle:

+12V - BLU
GROUND - WHT/BLK
FAST - BLU/RED
SLOW - BLU/BLK

Special Rain Tracker Installation Notes for this vehicle:

Write the wire colors of the vehicle on the HSS drawing, and follow that
when you wire up the Rain Tracker. Use the factory drawing as a reference
to help you find the wires. Some models and years may vary slightly in wire colors.
Factory drawings can be wrong, so, confirm wire colors with a multimeter.

All wiper system wires are available at the wiper switch. They can usually be accessed
by removing one or two access panels (Kick Panels) and, possibly, the shrouds surrounding the
steering column.

FAST CONNECTION
FAST may be YEL/BLU

Hydreon Corporation makes rain sensing windshield wipers that may be retrofitted to most cars, light trucks, SUV's, and specialty vehicles. Rain Trackers are available for chassis builder applications, such as RV's or conversion vans. This page generated by vehicle data file name: toyota_tacoma_05.veh