Vehicle-Specific Installation Notes

Rain Tracker Model: RT-40A
Vehicle-Specific Installation Instructions
The instructions included with the product tell you how to install a Rain Tracker. This page gives special vehicle-specific information. Print this page using your browser's print function.

Application Vehicles
These instructions apply to these vehicles, which all have similar wiper systems:

TOYOTA AVALON 95 - 04
TOYOTA CAMRY 87 - 06
TOYOTA CELICA 83 - 99
TOYOTA COROLLA 83 - 94
TOYOTA CRESSIDA 82 - 88
TOYOTA SOLARA 99 - 07
TOYOTA STARLET 82 - 84
TOYOTA-TRUCK 4RUNNER 84 - 89
TOYOTA-TRUCK PICKUP 82 - 88
TOYOTA-TRUCK PREVIA 91 - 97
TOYOTA-TRUCK VAN 84 - 89

Wiring Diagrams and Drawings:

1996 Toyota Camry- Drawing applies to all application vehicles listed above. Print this.
RT-40A - HSS (Hot Side Switching)- Included with product, so print only if needed.
Troubleshooting procedure- Print out if needed.

Wire colors used in this vehicle:

+12V - BLU
GROUND - WHT/BLK
FAST - BLU/ORN
SLOW - BLU/BLK

Special Rain Tracker Installation Notes for this vehicle:

Write the wire colors of the vehicle on the HSS drawing, and follow that
when you wire up the Rain Tracker. Use the factory drawing as a reference
to help you find the wires. Some models and years may vary slightly in wire colors.
Factory drawings can be wrong, so, confirm wire colors with a multimeter.

All wiper system wires are available at the wiper switch. They can usually be accessed
by removing one or two access panels (Kick Panels) and, possibly, the shrouds surrounding the
steering column.

WIRE CONNECTIONS
1983 Celica - SLOW - BLU/RED, FAST - YEL/BLK
1984-1986 Celica - FAST - YEL/BLU

The RT-40A does not utilize the FAST windings of the wiper motor. Please disregard any references
to FAST that appear in these instructions.

The Rain Tracker wiper control system works in parallel with the existing wiper system, so the existing manual control modes are not affected. This page generated by vehicle data file name: toyota_camry_87-06.veh