Vehicle-Specific Installation Notes

Rain Tracker Model: RT-50
Vehicle-Specific Installation Instructions
The instructions included with the product tell you how to install a Rain Tracker. This page gives special vehicle-specific information. Print this page using your browser's print function.

Application Vehicles
These instructions apply to these vehicles, which all have similar wiper systems:

INFINITI I30 00 - 01
INFINITI I35 02 - 04
INFINITI QX4 01 - 03

Wiring Diagrams and Drawings:

2003 Infiniti I35- Drawing applies to all application vehicles listed above. Print this.
RT-50 - GSS (Ground Side Switching)- Included with product, so print only if needed.
Troubleshooting procedure- Print out if needed.

Wire colors used in this vehicle:

+12V - RED
GROUND - BLK
FAST - BLU/BLK
SLOW - BLU

Special Rain Tracker Installation Notes for this vehicle:

Write the wire colors of the vehicle on the GSS drawing, and follow that
when you wire up the Rain Tracker. Use the factory drawing as a reference
to help you find the wires. Some models and years may vary slightly in wire colors.
Factory drawings can be wrong, so, confirm wire colors with a multimeter.

All wiper system wires are available at the wiper switch. They can usually be accessed
by removing one or two access panels (Kick Panels) and, possibly, the shrouds surrounding the
steering column.

The Rain Tracker wiper control system features better rain sensing performance than many OE rain sensor systems. Hydreon Corporation tests all its products to exacting standards. This page generated by vehicle data file name: infiniti_i35_02-04.veh