Rain Tracker Model: RT-40A
Vehicle-Specific Installation Instructions
The instructions included with the product tell you how to install a Rain Tracker.
This page gives special vehicle-specific information.
Print this page using your browser's print function.
Application Vehicles
These instructions apply to these vehicles, which all have similar wiper systems:
LAND-ROVER DEFENDER 93 - 97
LAND-ROVER DISCOVERY 94 - 04
LAND-ROVER RANGE ROVER 87 - 02
Wiring Diagrams and Drawings:
1997 Land Rover Discovery- Drawing applies to all application vehicles listed above. Print this.
RT-40A - HSS (Hot Side Switching)- Included with product, so print only if needed.
Troubleshooting procedure- Print out if needed.
Wire colors used in this vehicle:
+12V - GRN/GRY
GROUND - BLK
FAST - BLU/LT-GRN
SLOW - RED/LT-GRN
Special Rain Tracker Installation Notes for this vehicle:
Write the wire colors of the vehicle on the HSS drawing, and follow that
when you wire up the Rain Tracker. Use the factory drawing as a reference
to help you find the wires. Some models and years may vary slightly in wire colors.
Factory drawings can be wrong, so, confirm wire colors with a multimeter.
All wiper system wires are available at the wiper switch. They can usually be accessed
by removing one or two access panels (Kick Panels) and, possibly, the shrouds surrounding the
steering column.
1995 - 2002 RANGE ROVER
The wires are availible at the wiper motor.
2000 - 2004 Discovery II
+12V is GRN on some.
The RT-40A does not utilize the FAST windings of the wiper motor. Please disregard any references
to FAST that appear in these instructions.
Hydreon Corporation provides vehicle-specific installation information for over 5000 differen models of cars, vans, SUV's, and light trucks. This page generated by vehicle data file name: land_rover_discovery_94-03.veh
Copyright 2008 Hydreon Corporation All rights reserved.