Vehicle-Specific Installation Notes

Rain Tracker Model: RT-50
Vehicle-Specific Installation Instructions
The instructions included with the product tell you how to install a Rain Tracker. This page gives special vehicle-specific information. Print this page using your browser's print function.

Application Vehicles
These instructions apply to these vehicles, which all have similar wiper systems:

JEEP GRAND CHEROKEE 99 - 04

Wiring Diagrams and Drawings:

2001 Jeep Grand Cherokee- Drawing applies to all application vehicles listed above. Print this.
Troubleshooting procedure- Print if needed.

Wire colors used in this vehicle:

+12V - BRN/PNK
GROUND - CHASSIS
FAST - PPL
MUX1 - DK-BLU/YEL
MUX2 - DK-GRN/RED

External Components Required for this installation

RESISTOR - 68 - Color code: BLU-GRY-BLK

Special Rain Tracker Installation Notes for this vehicle:

Use the instructions included in the Rain Tracker kit until you get to step 5a. "Make the interface
connections." At that point, use these instrctions along with the diagram that can be printed above.
Return to the general instructions when the interface connections has been completed.

Some models and years may vary slightly in wire colors. Confirm wire colors with service
guide, and/or with with a multimeter.

WIRE CONNECTIONS
2002 - 2004 Grand Cherokee - FAST - RED/GRY and MUX1 - WHT/BLK

The Rain Tracker wiper control system works in parallel with the existing wiper system, so the existing manual control modes are not affected. This page generated by vehicle data file name: jeep_grand_cherokee_01.veh