Vehicle-Specific Installation Notes

Rain Tracker Model: RT-50A
Vehicle-Specific Installation Instructions
The instructions included with the product tell you how to install a Rain Tracker. This page gives special vehicle-specific information. Print this page using your browser's print function.

Application Vehicles
These instructions apply to these vehicles, which all have similar wiper systems:

CADILLAC CIMARRON 84 - 88
CADILLAC-TRUCK ESCALADE 99 - 01
CHEVROLET CAVALIER 85 - 94
CHEVY-TRUCK ASTRO-VAN 88 - 05
CHEVY-TRUCK BLAZER 85 - 97
CHEVY-TRUCK EXPRESS 98 - 02
CHEVY-TRUCK HHR 06 - 07
CHEVY-TRUCK KODIAK 03
CHEVY-TRUCK LUMINA APV VAN 90 - 96
CHEVY-TRUCK PICKUPS C & K SERIES 85 - 98
CHEVY-TRUCK S-10 82 - 97
CHEVY-TRUCK SUBURBAN 85 - 99
CHEVY-TRUCK TAHOE 95 - 99
CHEVY-TRUCK VAN G-SERIES 93 - 97
GMC-TRUCK JIMMY 82 - 97
GMC-TRUCK PICKUPS C & K SERIES 82 - 87
GMC-TRUCK S-15 82 - 90
GMC-TRUCK SAFARI 85 - 05
GMC-TRUCK SAVANA 98 - 02
GMC-TRUCK SIERRA 88 - 00
GMC-TRUCK SONOMA 91 - 97
GMC-TRUCK SUBURBAN 82 - 99
GMC-TRUCK YUKON 92 - 99
OLDSMOBILE-TRUCK BRAVADA 91 - 97
OLDSMOBILE-TRUCK SILHOUETTE 90 - 96
PONTIAC FIERO 85 - 88
PONTIAC SUNBIRD 82 - 94
PONTIAC TRANS SPORT 90 - 96

Wiring Diagrams and Drawings:

GM SWM type wiper systems- Drawing applies to all application vehicles listed above. Print this.
Use for older GM without intermittent- Print if needed.
Troubleshooting procedure- Print if needed.

Wire colors used in this vehicle:

+12V - YEL or WHT
GROUND - CHASSIS
FAST - PPL
MUX - BRN or GRY

External Components Required for this installation

RESISTOR - 390 - Color Code: ORN-WHT-BRN

Special Rain Tracker Installation Notes for this vehicle:

Use the instructions included in the Rain Tracker kit until you get to step 5a. "Make the interface
connections." At that point, use these instrctions along with the diagram that can be printed above.
Return to the general instructions when the interface connections has been completed.

Some models and years may vary slightly in wire colors. Confirm wire colors with service
guide, and/or with with a multimeter.

All wiper system wires, except ground, are available at the wiper switch. They
can usually be accessed by removing one or two access panels (Kick Panels) and,
possibly, the shrouds surrounding the steering column.

FIND CHASSIS GROUND
Find a suitable screw or bolt on the metal chassis of the vehicle to use as the
Rain Tracker ground. Scrape away paint as needed for a good connection.
Use a multi-meter to verify that the ground connection is at most a few ohms.
The cigarette lighter can also be a good alternate for ground and/or power.

WIRE CONNECTIONS
1998-2003 Cadillac Seville - MUX - DK-BLU
2006-2007 Chevy HHR - FAST - LT-GRN, MUX - GRY
1994-1996 Chevy Lumina APV, Pontiac Trans Sport and
Oldsmobile Silhouette - FAST - PNK and MUX - DK-GRN

RESISTOR VALUE
If the Rain Tracker does not operate correctly, try using a larger resistor,
680 for example.

ALTERNATIVE INSTALLATION
Most of these vehicles have intermittent (pulse) wipers. For those without,
use the diagram for older GM without intermittent, and use the Hot Side Switching
drawing. (Comes with product.)Mark the vehicle wire colors on the Hot Side
Switching drawing, and use that to wire up the vehicle. The vehicle drawing is
for reference to help you find wires.

Hydreon Corporation provides vehicle-specific installation information for over 5000 differen models of cars, vans, SUV's, and light trucks. This page generated by vehicle data file name: gm_swm.veh