Vehicle-Specific Installation Notes

Rain Tracker Model: RT-50A
Vehicle-Specific Installation Instructions
The instructions included with the product tell you how to install a Rain Tracker. This page gives special vehicle-specific information. Print this page using your browser's print function.

Application Vehicles
These instructions apply to these vehicles, which all have similar wiper systems:

CHRYSLER PACIFICA 04 - 05
CHRYSLER VOYAGER 01 - 03
CHRYSLER TOWN & COUNTRY 01 - 07
DODGE-TRUCK CARAVAN, GRAND CARAVAN 01 - 07

Wiring Diagrams and Drawings:

Chrysler Vans 01-07- Drawing applies to all application vehicles listed above. Print this.
Troubleshooting procedure- Print if needed.

Wire colors used in this vehicle:

+12V - PNK/WHT
GROUND - PPL/ORN
MUX - BRN/YEL

External Components Required for this installation

RESISTOR - 680 - Color Code: BLU-GRY-BRN
RESISTOR - 330 - Color Code: ORN-ORN-BRN

Special Rain Tracker Installation Notes for this vehicle:

Use the instructions included in the Rain Tracker kit until you get to step 5a. "Make the interface
connections." At that point, use these instrctions along with the diagram that can be printed above.
Return to the general instructions when the interface connections has been completed.

Some models and years may vary slightly in wire colors. Confirm wire colors with service
guide, and/or with with a multimeter.

All wiper system wires are available at the wiper switch. They can usually be accessed
by removing one or two access panels (Kick Panels) and, possibly, the shrouds surrounding the
steering column.

WIRE CONNECTIONS
GROUND may be PPL/LT-BLU

The Rain Tracker wiper control system works in parallel with the existing wiper system, so the existing manual control modes are not affected. This page generated by vehicle data file name: chrysler_cv1.veh