Vehicle-Specific Installation Notes

Rain Tracker Model: RT-50A
Vehicle-Specific Installation Instructions
The instructions included with the product tell you how to install a Rain Tracker. This page gives special vehicle-specific information. Print this page using your browser's print function.

Application Vehicles
These instructions apply to these vehicles, which all have similar wiper systems:

SUBARU BAJA 03 - 06
SUBARU FORESTER 98 - 07
SUBARU IMPREZA 93 - 07
SUBARU LEGACY 90 - 07
SUBARU OUTBACK 96 - 07
SUBARU TRIBECA 06 - 07

Wiring Diagrams and Drawings:

2004 Subaru Forester- Drawing applies to all application vehicles listed above. Print this.
RT-50A - HSS (Hot Side Switching)- Included with product, so print only if needed.
Troubleshooting procedure- Print out if needed.

Wire colors used in this vehicle:

+12V - YEL/BLK
GROUND - BLK
FAST - RED/BLU
SLOW - BLK/BLU
CAM - GRN/YEL

Special Rain Tracker Installation Notes for this vehicle:

Write the wire colors of the vehicle on the HSS drawing, and follow that
when you wire up the Rain Tracker. Use the factory drawing as a reference
to help you find the wires. Some models and years may vary slightly in wire colors.
Factory drawings can be wrong, so, confirm wire colors with a multimeter.

All wiper system wires are available at the wiper switch. They can usually be accessed
by removing one or two access panels (Kick Panels) and, possibly, the shrouds surrounding the
steering column.

WIRE CONNECTIONS
Some older models have +12V = WHT/BLU
2006 Tribeca - SLOW is RED, FAST is BLUE.
2007 Impreza - FAST may be RED

Hydreon Corporation provides vehicle-specific installation information for over 5000 differen models of cars, vans, SUV's, and light trucks. This page generated by vehicle data file name: subaru_all_models_90-04.veh